How To Add Custom Ringtones To Galaxy Watch 4

In this guide, we will show you the steps to add together custom notifications, ringtones, and alarm sounds on your Galaxy Watch iv/5. Both the fourth and fifth iteration of smartwatches from Samsung comes with 10 notification sounds and 10 ringtones. And that'south simply about it. Y'all do not have the option to download and ready a custom tone of your choice, well at least not the native way.  Adding more to the misery, there exists just a single alert tone also.

And as yous might have guessed, there's again no option to add a custom alarm tone. For many, that might not be an consequence only for some users like us, why restrict ourselves to but a scattering of tones when nosotros know that our device is running an open-source Os that is capable of doing then much more? So making use of the same, this guide volition make you enlightened of the steps to add custom notifications, ringtones, and alert sounds on your Galaxy Sentry 4/5. Follow along.

• Add Custom Notifications, Ringtones, and Alarms on Galaxy Picket 4/5
  • Stride one: Install Android SDK
  • Footstep two: Download Custom Tone
  • Step three: Enable ADB Debugging in Milky way Wach 4/v
  • Stride four: Connect Galaxy Watch iv/five to PC via ADB Command
  • STEP 5: Transport Custom Tones to Spotter via ADB
  • STEP 6: Refresh Watch Sound Storage
  • Step seven: Bring up Sound File ID
  • Pace 8: Add Sound to System

Add together Custom Notifications, Ringtones, and Alarms on Galaxy Watch 4/5

The below instructions are listed nether dissever sections for ease of agreement. Make sure to follow the same sequence equally mentioned.

STEP ane: Install Android SDK

First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided past Google and is the merely recommended i. So download it and then extract it to any convenient location on your PC. Doing so will give y'all the platform-tools folder, which volition exist used throughout this guide.

STEP 2: Download Custom Tone

Adjacent up, download the desired custom notifications, ringtones, and/or alarm sounds for your Watch 4/v. It is recommended that the sound should be in .ogg or .mp3 format [.wav and .amr might also work but I haven't personally tested them]. Moreover, in one case you take downloaded the tones, transfer them to the platform-tools folder.

STEP 3: Enable ADB Debugging in Milky way Wach 4/5

1. Head over to Settings > About Watch > Software and tap Software Version seven times.
2. And so become to Developer Options and enable the toggle next to ADB Debugging.
3. Afterwards that, scroll downwardly a footling bit and enable the toggle side by side to Debug over WiFi.
   
4. It volition at present bring upwards the IP Address, note information technology downward somewhere [do non include the port number, i.eastward. values after the colon].
5. For example, if the unabridged value is 192.168.1.3:5555, then your IP volition be 192.168.one.3.

Step iv: Connect Galaxy Picket 4/5 to PC via ADB Control

1. Caput over to the platform-tools folder, type in CMD in its address bar, and hit Enter. This will launch Command Prompt.
2. Now type in the below command in this CMD window [make sure to supplant IP appropriately].

   adb connect IP

   

3. You will at present get a prompt on your sentinel, tap OK or Ever Allow from this estimator.
   
4. Finally, execute the below command to verify the ADB Connection between your watch and PC

   adb devices

   

5. Y'all will now become your IP Address and port number, followed by the 'device' keyword. This signifies that the connexion has been successfully established.

STEP 5: Transport Custom Tones to Watch via ADB

Adjacent up, yous will now have to transport the downloaded custom notifications, ringtones, and/or alarm sounds to your Sentry 4/5 via the ADB Push command. Here's how it could be done

1. To begin with, transfer the desired sound file to the platform-tools folder on your PC.
2. Rename it to something shorter then that it becomes easier to type in the CMD window.
3. Now use the command depending on the blazon of file that y'all are transferring [supervene upon file_name and .mp3, if required]

                       adb push button                      file_name.mp3 /sdcard/Ringtones/  adb push                      file_name                      .mp3 /sdcard/Notifications/  adb button                      file_name                      .mp3 /sdcard/Alarms/                  

   

4. For case, I'm transferring the Droidwin.mp3 ringtone file, so the control in my example will be:

                       adb push button                      Droidwin.mp3 /sdcard/Ringtones/                                      

STEP half dozen: Refresh Lookout Audio Storage

Now execute the below command to refresh the watch's sound storage settings then that it is able to identify the newly added audio. Make certain to supercede the file type [notifications, ringtones, or alarm] and filename accordingly in the below command:

adb shell am broadcast -a android.intent.action.MEDIA_SCANNER_SCAN_FILE -d file:///storage/emulated/0/                Ringtones/Droidwin.mp3                >nul

STEP 7: Bring upward Sound File ID

1. You volition now take to bring up the file ID for the newly added sound. So use the below command for that:

   adb vanquish content query --uri content://media/external/audio/media/ --projection _id:_display_name

   

2. For example, in my instance the file name is Droidwin.mp3 and the respective ID is 38.

STEP 8: Add Sound to Organization

1. Finally, yous will now have to add that file ID to the system. In other words, add that custom audio to the system audio settings.
2. Then use the command depending on the file that yous want to add. Likewise, supersede ID according to the value that you lot got in the higher up command:

   Ringtones --> adb beat out settings put system                    ringtone                    content://media/external/audio/media/ID                    Notifications --> adb shell settings put system                    notification_sound                    content://media/external/audio/media/ID                    Alarms --> adb shell settings put system                    alarm_alert                    content://media/external/audio/media/ID                  

3. For example, I'thou adding a ringtone named Droidwin.mp3 with File ID 38, so the in a higher place command will transform to:

   adb trounce settings put organisation ringtone content://media/external/sound/media/38

   

4. The sound has at present been added to your watch. You could admission it from Settings > Sounds and Vibrations  > Ringtones/Notification Sounds.

That'south it. These were the steps to add together custom notifications, ringtones, and warning sounds on your Galaxy Watch four/five. If y'all have any queries concerning the aforementioned steps, do let us know in the comments. Nosotros volition get back to yous with a solution at the earliest.

---

• Measure ECG and BP on Milky way Watch 5 [Unsupported Countries]
• Change Screen Density/DPI/Display Size in Galaxy Sentinel 5
• Install Google Assistant in Milky way Watch five/Pro [Unsupported Countries]
• Install Google Pay/Wallet in Galaxy Picket five/Pro in an Unsupported Country

Almost Main Editor

Sadique Hassan

administrator

A technical geek by birth, he always has a cracking interest in the Android platform right since the nascency of the HTC Dream. The open-source surround e'er seems to intrigue him with the plethora of options available at his fingertips. "MBA past profession, blogger by option!"

Source: https://www.droidwin.com/add-custom-notifications-ringtones-alarms-on-galaxy-watch-4-5/

Share this post